Fill Dirt in Raley Industrial Park, CA

Prices for delivered fill-dirt in the Raley Industrial Park area vary by supplier, truck distance, and material type. As a rough guide, expect delivered rates in the Sacramento region to fall within a range instead of a single price: roughly $25 to $50 per ton or about $30 to $60 per cubic yard (1 cubic yard ≈ 1.2 tons). A tri-axle truckload typically carries 10–12 cubic yards (varies by truck and material) so a single truck delivery will multiply the per-yard price; contact us for an accurate, site-specific quote.

Yes — Hello Gravel can arrange fill-dirt delivery to Raley Industrial Park when suppliers and haulers are available in the zip code. Our minimum order is 3 tons; standard lead time is 2+ business days, and next-day delivery is sometimes available for orders placed before noon CST for an extra fee. Delivery fees depend on supplier proximity and access at your site; many orders qualify for free delivery but final charges are shown at checkout or on your quote.

Drivers may be able to perform tailgate spreading at their discretion, but this service is not guaranteed and depends on site access and safety. Compaction is not provided as a standard service — contractors typically use compactors or rollers after placement. If you need spreading or compaction, note it in Order Notes and discuss options with our team so we can recommend local contractors or request a driver assessment.

Fill-dirt is generally cheaper than engineered gravel or crushed stone for bulk site raising and general backfill because it is less processed. However, for finished industrial pads, parking lots, or driveways you will often need gravel or crushed base under a surface to meet load and drainage needs. For simple leveling or bringing elevations up, choose clean or screened fill-dirt; for load-bearing pads, start with fill-dirt for bulk raise then cap with compacted base rock or aggregate.

Fill-dirt can be used to raise or rough-level a driveway or parking pad but it is not a durable surfacing material. For driveways or heavy-use parking pads in an industrial area, use fill-dirt only for bulk fill and follow with a compacted base (crushed rock or base course) and a suitable surface (recycled asphalt, gravel, or paving). If you only need to fill low spots or create grade, order screened fill-dirt; for structural pads, order engineered fill and then cap with a compactable base aggregate.

Measure the area (length x width) in feet and the average depth you need in feet, then multiply and divide by 27 to convert to cubic yards: (L x W x Depth) / 27 = cubic yards. As a practical conversion, estimate 1 cubic yard ≈ 1.2 tons for fill-dirt (varies by moisture and compaction); always add 5–10% waste/settlement for loose placement. Use our online material calculator or request a free quote with exact measurements to get a supplier estimate and delivery plan.

Common options near Sacramento include clean fill (native soil with minimal debris), screened fill (passed through a screen to remove rocks and organic matter), and engineered fill (specifically graded and sometimes tested for compaction). For landscaping and rough grading choose screened or clean fill; for foundations and paved parking lots use engineered fill specified by your engineer and compacted in lifts. Always confirm local supplier specifications and request material documentation if your project requires compaction testing or engineered soils.

Local permitting and testing requirements vary by city and the scope of the project; industrial sites often require grading permits, compaction testing, stormwater controls, and material documentation. California also has regulations about importing fill (for contaminated soils or certain quantities) so you may need to check with Sacramento County and the City of West Sacramento planning or building departments. Before ordering, contact your building department or project engineer and tell our team so we can coordinate materials that meet permit and testing needs.

Suppliers servicing Raley Industrial Park commonly use tri-axle dump trucks; these trucks typically carry about 10–12 cubic yards of loose fill (exact capacity depends on truck and local weight limits). Standard delivery windows are 2+ business days; next-day delivery may be available for earlier orders and a fee. Some suppliers or sites charge small dump or offload fees for restricted access, long unload times, or placement with a loader — discuss site access, gate times, and placement needs when you order so your quote includes any applicable fees.