Gravel in Petaluma, CA

A typical local dump truck (tri-axle) delivery in Petaluma carries about 10–15 tons of gravel. Prices vary by gravel type, but expect roughly $40–$120 per ton locally (base rock at the low end, decorative stone at the high end), so a truckload can range from about $400 to $1,800 before taxes and fees. Hello Gravel has a 3-ton minimum and will show exact pricing and delivery options for your zip code at checkout.

Coverage depends on depth: at 3 inches, 1 ton covers about 80 sq ft; at 2 inches it covers roughly 120 sq ft; and at 1 inch it covers about 240 sq ft. These numbers assume typical crushed gravel density used in residential projects; different gravel types (pea gravel, decorative, dense base) can change coverage slightly. Use our material calculator or contact our team for a precise estimate for your Petaluma project.

Buying in bulk and choosing locally sourced base gravel (crush-and-run or pit-run) is usually the most economical approach in Petaluma. Recycled crushed concrete can also be a lower-cost option but may not be suitable for all landscaping uses. Use Hello Gravel to compare local supplier prices and delivery fees to find the best total cost for your site.

A 50 lb bag is about 0.025 tons, so at 3 inches it covers roughly 2 sq ft, at 2 inches about 3 sq ft, and at 1 inch about 6 sq ft. Bags are convenient for small patches, planters, or repairs but are expensive for larger areas compared to bulk delivery. For most Petaluma yard and driveway projects, ordering by the ton is more cost-effective.

Costs depend on driveway width, depth, and material. For example, a 20 ft long by 10 ft wide driveway (200 sq ft) at a 3-inch depth needs about 2.5 tons of gravel; at $40–$120 per ton, materials would be roughly $100–$300, plus delivery and site prep costs. For an accurate quote tailored to your Petaluma address, use Hello Gravel to check prices and schedule delivery.

For vehicle traffic, 2 inches is generally too thin and will lead to tracking and rutting over time. We recommend at least 4–6 inches of compacted base (crush-and-run or class II) with a 1–2 inch top layer for finished appearance. Petaluma soils and seasonal rain mean a proper base and drainage will extend driveway life.

A 10x10 area is 100 sq ft. At common depths: 1 inch needs about 0.4 tons, 2 inches about 0.8 tons, and 3 inches about 1.25 tons of gravel. Choose depth based on use—walkways need less than drive lanes—and order at least our 3-ton minimum or supplement with bags if you only need a small amount.

A 7x14 trailer with roughly 2-foot-high sides holds about 7 cubic yards (14 ft × 7 ft × 2 ft = 196 cu ft ≈ 7.26 cu yd). Actual capacity varies with side height and how full the trailer is loaded; gravel weight also limits safe payload. In tonnage, that 7 cu yd of gravel is roughly 9–10 tons depending on material density.

Properly installed gravel with a solid base and good drainage can last decades as a structural layer; the top decorative layer typically needs topping up every 1–5 years depending on use and erosion. Petaluma's mild, wet winters can cause some movement, so occasional raking and adding material helps maintain appearance and function. Regular maintenance like weed control and regrading extends usable life.

Recycled crushed concrete or crusher-run material is often less expensive than new decorative gravel and works well for bases and driveways. Decomposed granite is another lower-cost option for paths, though it compacts differently and may require stabilizers. Consider tradeoffs: cheaper materials may require more maintenance or may not suit decorative needs in Petaluma yards.

For the structural base, 3/4u0022 minus or crush-and-run is commonly used and compacted to 4–6 inches. For the top layer, screened 3/8u0022 to 1/2u0022 crushed stone or 3/4u0022 clean gravel provides good drainage and traction; pea gravel looks nice but can move under tires. Pick sizes based on use—driveways need angular, compactable stone rather than round stones for stability in Petaluma's conditions.

Pit-run or crushed rock used for base (often sold as class II or crush-and-run) is usually the least expensive local option. Recycled crushed concrete can be even cheaper if available from local suppliers. Decorative gravels and specialty colors cost more, so specify the intended use when ordering to get the most cost-effective material via Hello Gravel.

Coverage depends on the truck's tonnage and desired depth. As a rule of thumb, at 3 inches depth 1 ton covers about 80 sq ft, so a 12-ton truck would cover roughly 960 sq ft at 3 inches, while a 15-ton truck would cover about 1,200 sq ft. Check the specific truck capacity and your required depth when ordering through Hello Gravel for precise coverage.

At 3 inches depth, 20 tons covers about 1,600 sq ft (20 × ~80 sq ft per ton). At 2 inches depth it would cover roughly 2,400 sq ft, and at 1 inch about 4,800 sq ft. Use these estimates to plan projects in Petaluma, and contact Hello Gravel for an exact calculation based on the gravel type you choose.

Pea gravel is typically priced higher than base rock; in the Petaluma area expect roughly $60–$120 per ton depending on color and supplier. A truckload (10–15 tons) could therefore run about $600–$1,800 before delivery and fees. For exact pricing and availability in your zip code, use Hello Gravel to get current quotes from local suppliers.