Gravel in East Los Angeles, CA

Prices change with supply and season, but typical delivered ranges in the East Los Angeles area are: crushed rock or 3/4u0022 minus: about $40 to $90 per ton; decomposed granite (DG): about $40 to $80 per ton; river rock (pea or larger): about $70 to $150 per ton. Exact delivered price depends on local supplier stock, delivery distance, and order size, so get a Hello Gravel quote for an exact cost.

Delivery is often a flat fee or included for larger orders; small deliveries in the LA metro can run $50 to $200 or $5 to $20 per ton for longer hauls. Labor for base preparation, compaction, and spreading typically ranges from $2 to $6 per square foot depending on access and site complexity, and larger contractor-installed driveways commonly total a few hundred to several thousand dollars. Tailgate spreading may be available at the driver’s discretion for an additional fee or included in contractor bids, but always confirm before delivery.

For East Los Angeles, angular crushed stone (3/4u0022 minus or 3/8u0022 for walking surfaces) and stabilized decomposed granite are good choices because they lock together better and resist washout. Avoid large, rounded river rock for driveways since it shifts and rolls; use river rock only in drainage swales or decorative beds. Always design with good drainage and a compacted base to handle occasional heavy rains.

There are multiple landscape supply yards and local aggregates suppliers serving East Los Angeles; Hello Gravel will connect you with nearby suppliers and haulers in your zip code. Typical lead times are 2 to 7 business days depending on stock and demand, and next-day delivery is sometimes available if you order before the cutoff (see checkout). For a firm ETA and material photos, request a quote through Hello Gravel.

Small residential gravel projects usually do not require special stormwater permits, but Los Angeles County and municipal rules encourage managing runoff and using permeable surfaces where practical. Larger regrading, new paved driveways, or projects that change drainage could trigger building permits or low-impact development (LID) requirements, so check with LA County Public Works or your local planning department. Also review HOA rules, because private covenants may impose restrictions beyond county rules.

Recommended steps are removing topsoil and vegetation, establishing proper slope to drain, installing geotextile fabric, placing 4 to 6 inches of compactable road base (class II base or crushed rock) and compacting, then topping with 2 to 3 inches of finish gravel. Edge restraints and surface cross-slope toward a drain or swale are important to prevent lateral migration. Typical contractor costs for thorough prep plus material and installation in the LA area are often $2 to $6 per square foot, with total project pricing varying by access, site prep needs, and material choice.

Using a common density assumption (about 1.5 tons per cubic yard), expect roughly 0.93 tons per 100 sq ft at 2u0022, 1.39 tons per 100 sq ft at 3u0022, and 1.85 tons per 100 sq ft at 4u0022. That scales to about 9.26, 13.9, and 18.5 tons per 1,000 sq ft respectively. Densities vary by material, so use Hello Gravel’s calculator or request a supplier-specific estimate for exact ordering.

Many HOAs and neighborhood covenants set rules about driveway materials, exposed gravel in front yards, and even color or stone size, so restrictions are common in East LA neighborhoods. Permits are less common for simply adding loose gravel, but replacing a driveway surface or altering drainage might require county permits or approvals. Always check your HOA guidelines and contact LA County planning or your municipality before starting work.

Routine maintenance includes periodic regrading to correct ruts, adding a light top-up of gravel (often a few tenths of a ton per 100 sq ft per year), weed control (pre-emergent and spot removal), and occasional compaction. Expect modest annual costs roughly $50 to $400 depending on driveway size and whether you hire help; major refreshes or topping up material cost more. Proper initial base and edging reduces long-term maintenance in the LA climate.

Gravel is typically the lowest upfront cost option and is quick to install, but it requires more ongoing maintenance and periodic topping. Concrete and traditional pavers cost more up front (often several times gravel) but offer lower maintenance and longer durability; permeable pavers are more expensive still but can help meet stormwater and LID goals. For exact cost comparisons in East Los Angeles, get localized quotes since labor, disposal, and permit costs affect total project value.

Start by checking zip code availability on Hello Gravel, use our material calculator to estimate tons (minimum order 3 tons), and request a quote with your preferred delivery date. Standard delivery is 2+ business days, next-day may be available with timing rules, and drivers use dump trucks (typically tri-axle); Hello Gravel will connect you to a local supplier and confirm details before dispatch.