Fill Dirt in Earlimart, CA

A typical tri-axle truck carries about 10 to 14 cubic yards of loose fill dirt. Delivered truckload prices in the Earlimart area usually range from about $150 to $600 per load depending on distance, truck size, and material quality; exact price requires a ZIP-code quote. Hello Gravel's minimum order is 3 tons and many deliveries are scheduled on a 2+ business day timeline.

Locally, delivered fill dirt often runs about $10 to $30 per cubic yard in the Central Valley, though exact rates depend on supplier and delivery distance. For 1,000 sq ft: 1 inch = 3.09 yd3, 2 inches = 6.17 yd3, 4 inches = 12.35 yd3, and 6 inches = 18.52 yd3; multiply those volumes by your per-yard price for a cost estimate.

A 20x20 area is 400 sq ft. At 4 inches deep you need about 4.94 cubic yards of fill dirt; material cost at $10 to $30/yd3 would be roughly $50 to $150. Add delivery (varies by distance) and spreading/compaction labor or equipment, which commonly adds $150 to $400, so a typical all-in range is about $200 to $600 depending on site access and compaction needs.

Fill dirt is usually less expensive per cubic yard than structural gravel, but it is not a substitute for a driveway base because it compacts and holds water. Use fill dirt for raising grade or creating level pads, and choose crusher run or road base for a driveway subbase and clean gravel for surface drainage. For backyard leveling where drainage is not critical, compacted fill dirt can be fine if you plan to top with turf or landscape material.

The most budget-friendly driveway base in this region is usually crusher run or 3/4u0022 minus (road base), while decomposed granite or loose 3/4u0022 rock is a common low-cost surface. Expect delivered crusher run prices commonly around $25 to $45 per cubic yard versus $10 to $30/yd3 for fill dirt; a 12-yd truckload of base material therefore often costs more than a truckload of fill dirt but provides the necessary strength and drainage for a driveway. Consider the long-term value: gravel base costs more upfront but prevents potholes and drainage problems that fill dirt can cause.

Delivery fees vary with distance and access, but Hello Gravel typically schedules deliveries in 2+ business days and may offer free delivery in some areas; expect modest delivery charges if outside the supplier range. Labor to spread and grade a full truckload can run $150 to $400 if hiring local labor or machinery (skid steer, small excavator), and mechanical compaction equipment may be an additional rental or crew charge. Note: tailgate spreading by the driver can sometimes be requested at checkout but is at the driver's discretion and not guaranteed.

Do not use fill dirt for drainage applications: fill dirt tends to retain water and can cause pooling. For drainage, order clean drain rock or gravel (typically 3/4u0022 clean or 3/4u0022 minus for filter layers) and pair it with proper slope and perforated pipe for French drains. If you need both grade adjustment and drainage, use a combination: compacted fill dirt for the grade and a gravel layer or drainage trench where water must move.

Expect a delivered truckload (roughly 10 to 14 cubic yards) of fill dirt in the Earlimart area to be in the ballpark of $150 to $600 depending on exact yardage, supplier, and distance. Per-yard estimates of $10 to $30 or per-ton rates near $10 to $25/ton are typical starting points; final pricing requires your ZIP code and delivery address for an accurate Hello Gravel quote.

Two inches of any material is not sufficient for a driveway base. For a durable driveway you typically need 6 to 8 inches of compacted road base (crusher run) beneath the surface, plus 2 to 3 inches of wearing gravel on top. If you are only raising grade with fill dirt before installing a proper base, plan on compacting multiple lifts (typically 4 to 6 inches each) rather than placing a single 2-inch layer.

Costs depend on width and depth; for a single-car driveway 20 ft long by 10 ft wide (200 sq ft), 4 inches of fill dirt is about 2.47 cubic yards and 6 inches of compacted base is about 3.70 cubic yards. Material cost for that small fill quantity may be $25 to $75, while a proper crushed-base installation (materials plus compaction and labor) often runs several hundred dollars; expect a small project total in the low hundreds for fill-only work and $500+ when installing a structural gravel base and compaction.