Fill Dirt in Coalinga, CA

Delivered fill dirt in Coalinga commonly runs about $15 to $30 per cubic yard and roughly $12 to $22 per ton, depending on moisture, screening, and hauling distance. Prices vary with supplier availability and truck access; Hello Gravel requires a minimum order of 3 tons and will provide an exact delivered price for your zip code.

Hello Gravel connects you with local suppliers and contracted haulers that serve Coalinga and nearby West California areas. Typical minimums range from Hello Gravel's 3-ton minimum up to 5-10 tons for some local pit operators; contact Hello Gravel or our sales team to get a list of nearby suppliers and their exact minimums.

Coalinga's hot, dry summers promote drying and shrinkage, and local clay-rich soils can swell when wet, causing movement in unprepared fills. Choose well-graded material, control moisture during placement, compact in lifts, and design surface drainage to reduce settling and swelling risks in this climate.

Yes, most structural fills require mechanical compaction performed in lifts to meet common compaction specs; this reduces future settling and unevenness. Mechanical compaction is typically provided by contractors or equipment rental—Hello Gravel delivery does not include compaction, so arrange compaction services separately if needed.

It depends on the scope: small landscaping fills often need no permit, but raising grades that change drainage, constructing driveways, or building foundation pads can trigger Fresno County or City of Coalinga permitting and grading regulations. Before major fills, check with the City of Coalinga and Fresno County building and planning departments to confirm permit and setback requirements.

One cubic yard equals 27 cubic feet and will cover 324 sq ft at 1u0022 depth (or 54 sq ft at 6u0022 depth). For quick examples: a 1,000 sq ft area at 4u0022 deep needs about 30 cubic yards (around 33-42 tons depending on moisture and composition); a 10x10 pad 8u0022 deep requires about 2.5 cubic yards (roughly 3 tons). Use these conversions as estimates and add 5-15% for compaction and settlement.

Screened fill dirt is cleaned of large rocks and clods and is better for topsoil replacement, lawn areas, and under pavers; unscreened fill is cheaper and fine for bulk mass fills where the surface will be covered. Screened material commonly costs $3 to $8 more per cubic yard in the Coalinga area; use screened for the top 6 to 12 inches to avoid planting and grading problems.

Possibly. Long drives, narrow rural lanes, steep grades, or need for off-street drop zones can add fuel or access fees and may require smaller trucks or manual spreading; provide photos and clear access info at checkout so Hello Gravel can quote any access-based charges and confirm truck type.

Fill dirt alone is poor at stopping erosion on steeper slopes; in Coalinga's climate, pair fill dirt with erosion-control measures like geotextile fabric, mulch or erosion blankets, fast-establishing seed mixes, and drainage features such as swales or rock-lined channels. For long-term stability on steeper or highly erodible slopes, consider retaining structures or riprap in addition to soil stabilization methods.

No—fill dirt is not recommended as the driving surface because it compacts into a soft, rutted layer and sheds water poorly. Use fill dirt only to raise and level the subgrade, then install a compacted crushed rock or decomposed granite surface for a durable, low-maintenance driveway in Coalinga's climate.