Fill-dirt in Williams, AZ

Prices vary with local supply and haul distance, but in Williams you can generally expect fill-dirt to run roughly $10 to $25 per cubic yard (about $8 to $20 per ton) delivered. Remote or high-elevation deliveries and requests for special screening may push pricing toward the upper end; check our online quote for exact, up-to-date rates for your zip code.

For grading and raising low areas in Williams, choose a clean, screened fill-dirt with low organic matter and minimal large rock so it compacts well. For driveways, use fill-dirt only as subgrade; top it with a crushed stone or road-base layer for durability in the region’s seasonal freeze and snow.

One loose cubic yard of typical fill-dirt is about 1.2 to 1.4 tons; a good rule of thumb is 1.3 tons per cubic yard. A 10x10 area at 6 inches deep is 1.85 cubic yards (about 2.4 tons); a standard 10x10x12u0022 would be 3.7 cubic yards (about 4.8 tons).

Fill-dirt performs well as bulk fill in Williams’ semi-arid, high-elevation climate if it is free of organic material and properly compacted in lifts. Freeze/thaw and occasional snow can cause settling if material is loose or contains fines; compaction and a proper surface wearing course (for driveways) reduce those risks.

Hello Gravel works with trusted local suppliers and haulers serving Williams and the surrounding West Arizona region; availability depends on your zip code. Typical minimum online orders start at 3 tons, which aligns with our nationwide minimum, and tri-axle dump trucks are commonly used for delivery. Use our checkout or contact our sales team to see which local supplier is assigned to your order.

Labor and equipment costs vary by contractor, but expect operator rates plus machine rental: small excavator/skid-steer time commonly ranges $150 to $350 per hour, and a ride-on plate or small roller runs about $100 to $200 per hour. Many homeowners pay contractors a flat crew rate for a half- or full-day to spread and compact material; get local quotes for precise pricing and mention Williams site access and elevation when requesting bids.

Fill-dirt is the least expensive option for raising grade or backfilling, but it is not a durable driving surface. Crusher-run and road base are designed to compact into a stable, load-bearing surface and are better choices for a driveway in Williams; they cost more up front but last longer and need less maintenance. A common approach is fill with screened fill-dirt, then install a 4u0022 to 8u0022 layer of crusher-run or road base on top for the driveway surface.

To support light vehicles, place fill-dirt in 4u0022 to 6u0022 lifts and compact each lift thoroughly until you achieve at least 90% to 95% relative compaction per standard field testing or an engineer’s recommendation. In practice, many residential sites use 8u0022 to 12u0022 of compacted engineered fill or road base as the structural layer beneath any top surface for reliable vehicle support.

As a buried subgrade, properly compacted fill-dirt can last indefinitely, but surface or loose fill will settle and may need occasional regrading, especially after heavy rains or freeze cycles. If used temporarily or as a surface, expect to re-level and re-compact in the first year; adding a wearing course like crusher-run extends service life and reduces maintenance in Williams’ climate.

Yes. Changing grades, moving significant quantities of dirt, or altering drainage may trigger permits or erosion-control requirements from the Town of Williams or Coconino County. Check local codes and, if in doubt, contact the town or your contractor before work begins; our sales team can also help point you toward local permitting resources.

Measure the space and use our material calculator to estimate cubic yards, then convert to tons using about 1.3 tons per cubic yard to check our minimum order of 3 tons. Select screened or select fill if you need good compaction, request delivery date windows at checkout (standard is 2+ business days, next-day possible before noon CST), and add order notes for access details or preferred drop location.