Fill-dirt in West Sedona, AZ

One cubic yard of loose fill-dirt typically weighs about 1.2 to 1.4 tons depending on moisture and soil type. For planning in West Sedona use 1.3 tons/yd3 as a practical rule of thumb, but expect variation due to local soils and moisture from monsoon season.

Use 1.3 tons per cubic yard for quick estimates. At 1 inch depth you need about 3.09 yd3 (~4.0 tons); 3 inches ≈ 9.26 yd3 (~12.0 tons); 6 inches ≈ 18.52 yd3 (~24.1 tons). Add 5-10% extra for settlement and grading waste.

Hello Gravel minimum order is 3 tons. Delivery costs vary by distance, driveway access, and local supplier availability—many West Sedona deliveries qualify for free or low-cost delivery, while remote or hard-to-access jobs may have fees ranging from a small surcharge to a few hundred dollars; check your zip code on our site for exact pricing.

Hello Gravel connects you to trusted local suppliers and haulers that serve West Sedona; supplier names vary by neighborhood and availability. Typical lead times are 2+ business days for standard delivery, with next-day options sometimes available for orders placed early (fees may apply); seasonal demand or special material needs can extend lead times to 3–7 business days.

Hot, dry periods cause fill-dirt to shrink and become loose if not properly compacted, while summer monsoon storms can cause erosion and washouts on newly placed fill. To perform well here, fill should be placed in compacted lifts, protected with temporary erosion controls, and provided with proper drainage before the rainy season.

You may need permits for significant grading, importing large quantities of fill, or altering drainage in West Sedona. Check with the City of Sedona planning office and the county office that serves your parcel (Yavapai or Coconino County depending on location) before you order, and consult a local civil engineer for projects affecting drainage or steep slopes.

On slopes, benching or terracing the slope and placing fill in thin lifts (typically 4–8 inches) with compaction between lifts is recommended. Use appropriate equipment (plate compactors or vibratory rollers), install erosion control (silt fences, straw wattles), and consider geotextile or retaining walls where required to stabilize steep fills.

Choose fill-dirt when you need to raise grade, backfill trenches, or regrade lawns and planting areas. Use crushed rock for driveways and hard surfaces, river rock for decorative mulch and drainage features, and engineered fill when project specs require tested, compacted material with documented compaction rates for structural work.

Some settlement is normal, especially for deeper fills—plan to top up and recompact after initial settlement and allow a buffer of 5–10% extra material. Keep an eye on erosion during monsoon season, maintain drainage paths, and add surface cover (mulch, gravel, or vegetation) to reduce washouts and dust.