Fill Dirt in Sundance, AZ

Yes. Fill-dirt is generally cheaper per ton than decorative gravel because it is unprocessed subsoil used for building up grades, while gravel is crushed, screened, and often transported further. Prices in Sundance vary by supplier and haul distance, so check our site for current local pricing and delivery options.

Typical delivered fill-dirt prices in the Sundance area commonly fall in the range of about $15 to $40 per ton, depending on supplier, haul distance, and the material quality. Exact pricing is shown during checkout for your zip code and the minimum order is 3 tons.

As a rule of thumb, 1 ton of fill-dirt will cover about 60 sq ft at 4-inch depth, about 40 sq ft at 6-inch depth, and about 120 sq ft at 2-inch depth. These are approximate because material density and compaction vary; plan to order 10-20% extra for settlement and compaction.

Hello Gravel typically uses tri-axle dump trucks operated by local haulers, and a single truckload for fill-dirt in Arizona commonly ranges from about 12 to 20 tons depending on truck type and local weight limits. Your exact load amount and number of truckloads will be shown on the order confirmation.

For a 20' x 100' area at 4 inches deep you need roughly 25 cubic yards, which equates to about 30 to 35 tons of fill-dirt depending on material density. Use our material calculator or contact our team for a site-specific estimate and to factor in compaction and waste.

The most cost-effective approach is to order larger loads from a local supplier to reduce per-ton haul costs, check for free delivery offers in your area, and compare quotes from nearby suppliers on our platform. Picking up material yourself can save delivery fees if you have the vehicle and permits to haul it safely.

Drivers may be able to perform tailgate spreading at their discretion; you can request this service at checkout and the driver will assess safety and feasibility on arrival. We do not guarantee spreading services, so plan for a separate spreading/compaction crew if you need precise grading.

In many Arizona municipalities and unincorporated county areas, adding large amounts of fill or altering grades can trigger grading, drainage, or permit requirements. Check with the City of Sundance (or your county planning department) and any HOA before ordering to avoid violations or drainage problems.

Yes. Fill-dirt typically settles and should be compacted in lifts during placement to minimize future settlement, especially for driveways, foundations, or areas that will receive structure loads. Work with a contractor to compact to the proper density and plan to order 10-20% extra to account for compaction and settlement.

Yes. Arizona subsoils commonly include caliche, clay, and small to medium-sized rock fragments; these are normal for locally sourced fill-dirt and affect drainage and compaction. If you need screened, rock-free, or sandy fill, request that in the order notes and we will match you with suppliers who offer those specifications when available.

As a quick estimate, 10 tons of fill-dirt will cover about 600 sq ft at 4-inch depth and about 400 sq ft at 6-inch depth, assuming typical material density. Remember these are approximations; heavier or wetter soils will cover less area and you should factor in compaction by ordering extra.

Fill-dirt is an economical way to build up grade or create non-structural base material, but it is not a substitute for engineered concrete or properly compacted aggregate base where structural strength and drainage are required. For driveways and pads that will see vehicle loads, pair fill-dirt with a compacted crushed-stone base or consult a contractor for the right build-up.

Contact Hello Gravel as soon as possible via the phone or text numbers on the site; order changes are easiest before dispatch and depend on supplier processing. We will do our best to accommodate changes, but modifications after trucks are dispatched or materials are staged may be limited.