Gravel in Booth, AL

Hello Gravel connects Booth customers with trusted local suppliers and quarries that serve West Alabama. In rural Booth, suppliers are usually within a 20-60 mile radius; we match you with the nearest available source and handle all coordination so you do not need to call multiple quarries.

Retail prices vary by material and local supply, but common ranges in West Alabama are roughly $20-$40 per ton for crushed limestone, $30-$60 per ton for crushed stone, and $30-$70 per ton for pea gravel. Prices change with season, truck availability, and distance from the quarry, so check your ZIP code on our site for an exact quote.

Hello Gravel requires a 3-ton minimum order and typically delivers by tri-axle dump truck. Many deliveries have free or low-cost delivery in populated areas, but in rural Booth you should expect variable delivery fees (commonly $0-$150) based on distance and truck routing; exact fees show at checkout when you enter your address.

For West Alabama’s humid conditions and clay subsoils, angular crushed stone (3/4u0022 crushed limestone or 3/4u0022-1u0022 crushed stone) with some fines compacts well and resists rutting. Pea gravel is attractive for walkways but can shift on clay unless installed over a compacted base and geotextile; use larger, angular base rock under top material for driveways on clay.

Calculate area in square feet and desired depth in inches. Cubic yards = (area in sq ft * depth in inches) / 324; then multiply cubic yards by about 1.3 (tons per cubic yard) to get tons. Example: a 200 sq ft area at 3u0022 deep is 200*3/324 = 1.85 cubic yards, or roughly 1.85*1.3 = 2.4 tons.

Costs vary by scope. For simple spreading and compaction you might see labor costs of around $0.50-$1.50 per sq ft (or roughly $10-$30 per ton) in rural areas; a full driveway install that includes excavation, geotextile, base stone, grading, and compaction can range from $1.50-$4.00 per sq ft. Always get local quotes because site access and drainage needs strongly affect price.

Excavate soft, saturated soils and install a stable base: lay geotextile fabric, place 4u0022-8u0022 of larger angular base stone in 2u0022-4u0022 lifts and compact each layer. Add a crown (3/4u0022 rise per foot across width) for runoff, install edge restraints, and consider French drains or swales on the downhill side to divert water; for very poor sites, a subdrain or undercut backfill may be needed.

Requirements vary. Many rural properties near Booth do not need a permit for private driveways, but driveways that connect to a public road often require a county or state driveway permit; HOAs may have rules about surface type and appearance. Check with Booth city hall, your county office, and any HOA before ordering to avoid rework.

Match the gravel to the use: for driveways choose angular crushed stone (3/4u0022 or 3/4u0022-1u0022) with a compactable base for strength; for walkways use pea gravel or small crushed stone (1/4u0022-3/8u0022) over compacted base and fabric for comfort and drainage. For pads under sheds or patios use a compactable base stone (3/4u0022 minus) and a 2u0022-3u0022 finish layer if desired; always consider local clay and drainage when selecting material.